The Flow Review Tool¶

Warning

Available in Factory Enterprise license.

The Flow Review Tool is used to check the validity of your flow. Rules and best practices are defined in an MS Excel file, which can be configured according to defined requirements.

This tool is essential to ensure that any flow satisfy compliance constraints, and to avoid generating errors in production.

It is extremely useful when new compliance rules are identified, as an updated MS Excel file can quickly be implemented to check multiple flows and spot where the new rule is not respected.

Best practices can also be identified to improve the quality of your flows and to avoid warnings. All these refinements allow the user to define a standard in flow development which is crucial in enterprise contexts.

To open the Flow Review Tool, right-click on a flow and select it from the flow context menu or directly from the flow toolbar by clicking the corresponding icon.

Review Validation File¶

To properly configure the Flow Review Tool, you need to provide an input Validation File which contains all the rules we expect our flow to respect.

The MS Excel file attached below can be downloaded and used as a template.

Click here to download the configuration file

Parametrization

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Category	The category name of Rulex Factory tasks. This mapping can be found in the Category Mapping page. Multiple categories can be specified, in round brackets, comma separated e.g. (sourceexcel, sourcetextfile). N.B. You can specify either the category or the task name, but not both. The asterisk * can be used as a wildcard, meaning all tasks, while *- means all tasks except those specified.
Task	The name of your specific tasks. Multiple tasks can be specified, in round brackets, comma separated e.g. (myexcel, mytextfile). N.B. You can either specify the category or the task, but not both.
Option	The name of the task option to be used in the rule. Multiple options can be specified, in round brackets, comma separated. The option names can be found by opening the Context Help menu in the bottom-right corner of every task, and hovering over the desired option. The asterisk * can be used as a wildcard, meaning all tasks, while *- means all tasks except those specified.
Parametrized	You can specify whether an option must be defined by a variable or not. Possible values are true: the value must be expressed as a flow variable. Sensitive: the value must be expressed as a sensitive (i.e. encrypted) flow variable. If left blank there is no constraint to express the value as a flow variable.
Acceptable Variable Names	The list of all acceptable variable names, enclosed in quotes and divided by commas - e.g. “sens_var”, “my_var”. This option is considered only if parametrized is true or sensitive.
Acceptable Values	The list of all acceptable values, enclosed in quotes and divided by commas - e.g. “john.smith@gmail.com”, “paolo.rossi@gmail.com”. Flow variables associated to the option will also be checked.
CondAtt1	Optional conditions that can be added to the rule that must be satisfied for the rule to be applied. It verifies if the value is equal or a substring of one of the values provided in the CondValue1 column. There is no limit to the number of conditions you can add, but all conditions will need to be satisfied (i.e. the relationship between conditions is AND). To add conditions with the OR operator applied, add a new row to the sheet for each new condition. To exclude values (not contains), you need to add an exclamation mark ! before the value.
CondValue1	Enter the possible values for the attribute specified in the CondAttx column. To exclude values (not contains), you need to add an exclamation mark ! before the value. Multiple values can be listed, enclosed in quotes and divided by commas - e.g. “mysharepointurl1”, “mysharepointurl2”

SQL Query

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Category	The category name of Rulex tasks. The only two tasks where you can generate SQL queries are Conditional Import and Import from Database, so the two possible values here are conditionalimport and sourcesql. This mapping can be found in the Category Mapping page. Multiple categories can be specified, in round brackets, comma separated e.g. (conditionalimport, sourcesql). N.B.: You must specify either the category or the task, but you cannot specify not both. The asterisk * can be used as a wildcard, meaning all tasks, while *- means all tasks except those specified.
Task	The name of your specific tasks. Multiple tasks can be specified, in round brackets, comma separated - e.g. (myexcel, mytextfile). “” is a wildcard, meaning all tasks, while “-” means all tasks except xx. N.B. You must specify either the category or the task, but you cannot specify not both.
Parameter	In this option, you specify whether the values you include in the Values option, must or must not be included in the SQL query. Possible values are contains or not contains.
Values	The list of values that must be checked in the SQL query, enclosed in quotes and divided by commas. For example “JOIN”, “SELECT”. Whether they must be present, or must not be present, is defined in the Parameter option.
Allow Empty	Define whether the query may be left empty or not. Possible options are “true” or “false”.
CondAtt1	Optional conditions that can be added to the rule that must be satisfied for the rule to be applied. It verifies if the value is equal or a substring of one of the values provided in the CondValuex column. For example “type”, which will only check rules where the type corresponds to a specific value, such as SQL Server. There is no limit to the number of conditions you can add, but all conditions will need to be satisfied (i.e. the relationship between conditions is AND). To add conditions with the OR operator applied, add a new row to the sheet for each new condition. To exclude values (not contains), you need to add an exclamation mark ! before the value.
CondValue1	Enter the possible values for the attribute specified in the CondAttx column. To exclude values (not contains), you need to add an exclamation mark ! before the value. Multiple values can be listed, enclosed in quotes and divided by commas - e.g. if the CondAtt1 value is type and the CondValue1 is “SQL Server”, the rule will only check queries when the type is SQL Server.

Functions

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Function	The name of the Data Manager function onto which you want to add a condition.
Usage Type	It is the condition you want to apply to the function. Possible values are: parametrized - you can only use the function via a variable. forbidden - you cannot use this function anywhere in your flow.

Alerts

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Alert	It is the type of alert the rule should be applied to. Possible values are: start end duration rows error
Value	Here you define whether the alert must be defined or not. Possible values are: True - the alert must have been defined. False - the alert must not be defined.
Recipients	Optionally specify whether the recipients of the error message must be defined in a variable or not. Possible values are: parametrized: the recipient must be defined in a variable. (blank): the recipient can be entered manually.
CondAtt1	It is an optional parameter that specifies whether the alert applies to a specific task or category. Possible values are: task category To exclude values (not contains), you need to add an exclamation mark ! before the value.
CondValue1	Enter the possible values for the attribute specified in the CondAttx column. To exclude values (not contains), you need to add an exclamation mark ! before the value. Multiple values can be listed, enclosed in quotes and divided by commas - e.g. “dataman1”, “textfile1”

Names

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Target	The type of object the naming restriction should be applied to. Possible values are: task workflow process variable alert
Parameter	It is the type of naming constraint to be applied to the target. Possible values are: maxlength excludechar
Value	The value that can be assigned to the naming constraint defined in the Parameter option. The value can either be a numerical value for maxlength, or a list of characters which cannot be used, with no comma separator for excludechar.

Flow

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Parameter	It is the rule you want to apply to the flow. Possible values are: hasname: the flow must have at least one task with the name specified in the Value column, e.g.”sqllite” hascategory: the flow must have at least one task which belongs to the category specified in the Value column, e.g. “sourcesql” maxparallel: the number of flows that can be computed in parallel must correspond to the number specified in the Value column, e.g. 4. This value is defined in Rulex Factory in the Flow Execution Parameters. nohanging: the flow must not contain tasks that are not connected to validparent, unless they are sources. Possible values to specify in the Value column are True if the rule must be applied, otherwise False. nodirtytask: the flow must not contain tasks in DIRTY status. Possible values to specify in the Value column are True if the rule must be applied, otherwise False. noerrortask: the flow must not contain tasks in ERROR status. Possible values to specify in the Value column are True if the rule must be applied, otherwise False. nowarningtask: the flow must not contain tasks in WARNING status. Possible values to specify in the Value column are True if the rule must be applied, otherwise False. noncomputedtask: the flow must not contain tasks in READY status. Possible values to specify in the Value column are True if the rule must be applied, otherwise False. noemptyhistory: the flow must not contain tasks with an empty history. Possible values to specify in the Value column are datamanager, rulemanager, resmanager, freqitmanager, advassmanager, filemanager. If left empty, the default value will be datamanager.
Value	The value the constraint selected in the Parameter column must have.

Variables

Column	Description
Description	You are free to enter a description, or leave the column blank, or even remove the column if you prefer. Any additional columns you add to those already present will not be considered by the Flow Review Tool.
Rule Type	The type of message which will be generated by the rule. This column is free, but we recommend using error or warning. Errors are listed first in the output file.
Variable Names	The list of the variables’ names that need to be checked, without @, enclosed in “ “ and divided by commas. E.g.: “Var_1”, “Var_2”.
Variable Values	The list of all the acceptable values, enclosed in “ “ and divided by commas (e.g.: “value1”, “value2”). Wildcards can be used, where * means all values, while - means all values except the ones listed after the -.
Sensitive	The sensitivity constraints of the rule. The possible values are: sensitive (the system checks if the variable is a sensitive one) vault (the system checks if the variable is a vault one). If this field is left empty, no sensitivity constraints are applied.
Must Exist	It checks whether the variables in the corresponding row exist or not. The possible values are: none (none of the variables in the Variable Names field must be present) all (all the variables in the Variable Names field must be present) at least one (at least one of the variables in the Variable Names field must be present) max one (one or none of the variables in the Variable Names field must be present). If left empty, no constraints will be applied.

Flow Review Tool Panel¶

You perform the actual configuration of the Flow Review Tool by modifying the following parameters in the flow review tool dedicated panel.

Parameter Name	Description
Input file	Select how you want to import the Excel configuration file. Import location selection follows the standard Filesystem connection configuration. It can be performed from the machine disk or from a remote location.
Output file	Select where you want to export the result file. Export location selection follows the standard Filesystem connection configuration. It can be performed towards the machine disk or towards the remote location.

Results file¶

The output results file contains a tab for each flow that has been checked with all warning/error messages generated, and an overall summary tab.

The summary tab displays general information such as the names of all checked flows, the numbers of errors and warnings found, the number of rules defined, and the start and end time of the flow.

The tabs for each individual flow contain the type of rule (error, warning or custom types), the sheet where the rule was not satisfied (e.g. Workflow) and the line which contains the violated rule, the task and corresponding option which did not respect the rule and an error message explaining the issue for each entry.

Note

Errors are displayed first, followed by warnings and then any custom rule types defined.